top of page

 LIGHTING AND PROJECTOR POLES

AREA LIGHTING POLES
ROAD POLES
Hinged Poles
Telecomination poles
ELLUMÄ°NAÄ°RE LOGO.png

TELECOMINATION POLES

Camera and Security Pole
Antenna Poles
high mast pole

HIGH MAST POLE

High mast lighting pole, which has been the sign of El luminaire’s genuine and pioneering style, works with the principle in maintenance and repair of high mast lighting poles, automatic raising and lowering of projectors instead of operators going up to the top of the poles. With a cable or remote control board, the projectors automatically go up or down. This system is needed because of time, labor, and safety. High mast poles can be used in highways, airports, ports, factories, construction sites, cross-roads, squares, parking lots, and sports fields.
Quality High mast pole mechanism by El Luminaire experience.
El luminaire high mast poles are manufactured basically in two types,
– 3-Rope Circular Type.
– Single Rope Rail Type

projector poles

PROJECTOR POLES

6 – 45 mt galvanized polygonal projector poles, which are the essential of the construction sector; used in one-way, two-ways and four-ways field lighting, can be produced with platform and protection ladder. Projector poles can be used in freeways, airports, ports, factories, construction sites, cross-roads, squares, parking lots, and sports fields.

– The height of the pole is 6 – 45 mt.

– It is produced one piece by slip–joint or flange connection of polygonal modules.

– There is a base plate for anchorage base montage.

– There are crossbar and platforms for the installment of the projectors.

– 1–way, 2–ways, 3–ways, 4–ways, 6–ways, 8–ways lighting can be done.

– The poles are protected by hot–dip galvanization against corrosion. (Painting over galvanization is optional.)

Hinged Poles

HINGED POLES

6 – 15 mt hinged poles, which make it easier to reach the equipment on top of the pole, are bent controlled with the hinge system placed in the bottom or middle of the pole.

– The height of the pole is 6 – 15 mt.

– It is produced hinged by slip–joint or flange connection of polygonal modules.

– There is a base plate for anchorage base montage.

– There is access from the ground to the top of the pole for the operator with the help of a pulley.

– There is a top crossbar for a projector, camera, and accessory montage.

– The poles are protected by hot–dip galvanization against corrosion. (Painting over galvanization is optional.)

– Special projects for standard wind speeds of 130 km/hour – 150 km/hour and various wind speeds (90 km/hour, 160 km/hour).

Flag Poles

FLAG POLES

4 – 19 mt galvanized or painted over galvanized flag poles, which are often preferred by EL LUMINAIRE’s customers, are produced in polygonal and circular section.

 

Galvanized Conical Polygonal Flag Pole (4 – 19 mt)

 Steel Circular Stepped Galvanized / Painted Flag Pole (4 – 12 mt)

Galvanized Conical Circular Flag Pole (4 – 12 mt)

CAMERA POLES

Camera Poles

2 – 30 mt camera, safety camera, and mobese poles, which take an important place in establishing personal and social safety, are used in mobese projects, freeways, airports, ports, factories, construction sites, cross-roads, squares, parking lots, sports fields and private properties.

– The height of the pole is 2 – 30 mt.

– It is produced one piece by slip–joint or flange connection of polygonal modules or stepped of circular sections.

– There is a base plate for anchorage base montage.

– There are crossbar and platforms for the installment of the cameras.

– There is a connection detail for the Dome camera installment.

– The poles are protected by hot–dip galvanization against corrosion. (Painting over galvanization is optional.)

– Special projects for standard wind speeds of 130 km/hour – 150 km/hour and various wind speeds (90 km/hour, 160 km/hour).

OVERHEAD POLES

OVERHEAD POLES

2 or 3 legged overhead poles; constructed from galvanized lattice, circular or polygonal sections for warning, guidance, and monitoring purposes, are used in freeways, main roads, side roads, airports, ports, factories, construction sites, cross-roads, and squares.

– The height of the pole is 4 – 10 mt.

– It is produced by slip–joint or flange connection of polygonal modules.

– There are columns and joists in the cage structure.

– There is a base plate for anchorage base montage.

– There are plate details for the accessory montage.

– The poles are protected by hot–dip galvanization against corrosion. (Painting over galvanization is optional.)

– Special projects for standard wind speeds of 130 km/hour – 150 km/hour and various wind speeds (90 km/hour, 160 km/hour).

There are 3 types: 1, 2, 3 – legged. Service platform, camera montage plate, and climbing ladder are optional.

RADAR EDS POLE

RADAR EDS POLE

Galvanized, steel constructed, 1 – legged overhead poles are used for warning purposes in freeways, main roads, side roads, airports, ports, factories, construction sites, cross-roads and squares.

– The height of the pole is 4 – 10 mt.

– It is produced by slip–joint of polygonal modules or flange connection of the tube section.

– There are columns and joists in cage structure.

– There is a platform on top of the pole.

– There is base plate for anchorage base montage.

– There are plate details for accessory montage.

– The poles are protected by hot–dip galvanization against corrosion. (Painting over galvanization is optional.)

– Special projects for standart wind speeds of 130 km/hour – 150 km/hour and various wind speeds (90 km/hour, 160 km/hour).

There are 3 types: 1, 2, 3 – legged. Service platform, camera montage plate and climbing ladder are optional.

GALVANIZED POLES

GALVANIZED POLES

For antenna usage; 10 – 60 mt monopole is produced galvanized, polygonal sectioned and outer–flanged.

– The height of the pole is 10 – 60 mt.

– It is produced one piece by slip–joint or flange connection of polygonal modules.

– Ä°nner or outer flange connections and modular type.

– There is base plate for anchorage base montage.

– There are crossbar and platform for the installment of GSM antennas.

– The poles are protected by hot–dip galvanization against corrosion. (Painting over galvanization is optional.)

– Special projects for standart wind speeds of 130 km/hour – 150 km/hour and various wind speeds (90 km/hour, 160 km/hour).

Limited tilt: Vibration and deflection movements as a result of wind, affects camera sensitivity in high poles negatively. With the help of static calculations, modifications on pole diameter and steel thickness make deflection to be restricted in demanded limits.

lattice tower

LATTICE TOWER

10 – 100 mt lattice poles, which are carrying high voltage lines and GSM antennas, are produced by using brace or circular components with bolt connection.

– The height of the pole is 10 – 100 mt.

– Pole or platform is produced for the montage of GSM antennas.

– Limited tilt design according to wind loads.

– The poles are protected by hot–dip galvanization against corrosion. (Painting over galvanization is optional.)

– Design according to preferred wind speeds (130 km/hour, 160 km/hour etc.)

Limited tilt: Vibration and deflection movements as a result of wind affects camera sensitivity in high poles negatively. With the help of static calculations, modifications on pole diameter and steel thickness make deflection to be restricted in demanded limits.

 

Caged ladder: Protection ringed ladder, which provides operator to reach the platform.

 

Portable ladder: Portable ladder, which provides operator to reach the platform.

 

Caged ladder, Portable ladder or sailor ladder (inner or outer) are optional.

  • Gri LinkedIn Simge
  • Instagram
  • Facebook
  • YouTube
ELLUMÄ°NAÄ°RE LOGO.png
bottom of page